Oce 9800 User Manual page 92

[81] Removing the core from the roll holder
You can place the new roll in the groove over the paper roll
Note:
compartment on the printer.
Press the locking mechanism down and slide the roll holder from the left into
5
the core of the new roll.
Position the roll between the correct format indicators and release the locking
6
mechanism (see figure 82).
[82] Placing a new roll on the holder
Use both hands to place the holder in the paper roll compartment. Position the
7
left hand side of the holder in its notch first, then the right hand side (see
figure 83).
If the new roll does not have a straight leading edge you can cut it manually.
8
92 Océ 9800 Printer User Manual