Introduction - Oce 9800 User Manual

Introduction

Problems that may occur with the Océ 9800 consist of:
Paper jams, (see page 111).
Problems with the Reinforcement Unit, (see page 130).
Problems which can be solved by following the instructions on the display
Other problems (Call Océ service), (see page 136).
When an error occurs, the display informs you about
what the problem is
where it has occurred
how to solve it
Copy material is normally transported through the system without any
problem. However, paper may get stuck. If this happens, a flashing cover or
door will be displayed on the graphic display, indicating in which part of the
system the paper has jammed.
Copies:
Check machine
0
Open roll unit and doors
Remove copy material
Close roll unit and doors
[109] Example of an error message
Stickers on some parts of the system indicate which green handles, green
knobs, green bars and covers, etc. are to be lifted, pressed or opened to remove
any jammed paper.
The display guides you through a sequence of steps to solve the problem. If a
jam occurs in more than one location, the display will continue to instruct you
until all jammed paper has been removed.
Once the error has been cleared, the display will give you instructions on how
to continue the job in such a way that all copies are correctly produced.
110 Océ 9800 Printer User Manual