Folded Copies (Optional) - Oce 9800 User Manual

Folded copies (optional)

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
The copies are folded according to the selected folding width and length in
combination with a folding method. The folding methods are Standard,
Ericsson and Afnor with or without a binding edge.
When selecting 'Portrait' as Folding method, all digital originals should be in
portrait orientation (see 'Auto rotate' on page 84). Only portrait-oriented
drawings can be folded with the legend on top. When choosing 'Automatic',
the machine determines the length of the digital original to obtain a good fold
package, depending on the roll width.
Polyester or transparent media cannot be folded. If you try to do so, a warning
appears in the display.
Long copies
between 2.5 m and 6 m long can only be processed by the first fold unit. The
Fist Fold Delivery will be selected automatically to collect the output.
Older models of the Océ 9800 may not be equipped with a First Fold
Note:
Delivery. In that case long copies must be removed from the folder by hand.
This is indicated on the display.
You can also select a folding method and if required a folding length, folding
width, binding edge and (if configured) to have it punched (see figure 45).
When changing the folding length and/or folding width, and the folder is
equipped with a high capacity output unit (belts) with punch unit, you must
also change the folding length and/or folding width in this unit (see 'High
capacity output unit with punch unit (optional)' on page 50).
Default printer settings
Long copies can be folded up to 6 m long. However copies
47