Oce 9800 User Manual page 87

Press the function button 'Print time out'.
2
Use the higher/lower buttons or the numeric buttons to define the new print
3
time out in seconds.
When ready quit the system administrator mode.
4
Automatic language sensing is the mechanism with which the system can
ALS
detect the language (data format) of a file of which the format has not been
specified in the file header. ALS scans the file contents for clues about the data
format. ALS detects all supported languages, except ASCII.
Use the ALS formats parameter to define which data formats are to be searched
for in the print files.
Defining ALS formats
Open the 'General' card in the 'Language' section.
1
Press the function button 'ALS formats'.
2
Use the scroll buttons to select the data format of your choice.
3
Press the right function button to activate the format switch-on box.
4
Use the scroll buttons to select 'on' for the current data format.
5
Repeat steps 2 to 5 for each data format.
6
When ready quit the system administrator mode.
7
Print margin
deviation of the length and width of a scanned image from a certain standard
format length and width when the autoroll and/or autozoom options have been
selected (in the printer driver). If this deviation is not exceeded, the image is
printed on the corresponding standard paper format. If it is, the image is printed
on the next larger standard paper format.
Defining Print margin
Open the 'General' card in the 'Language' section (see figure 78).
1
Prints:
Ready to print
0
General
Automatics
Pen menu
...................................................................................................................................
P
Formats
Print
time out
[78] Print margin option
System Administrator
This function allows the key operator to specify a maximum
15 sec
5 mm
Print
margin
................ ................
Machine Program
Calcomp
ALS
formats
................
................
Connect
Language
on
87