Stamp Unit (Optional) - Oce 9800 User Manual

Stamp unit (optional)

The following default print settings can be overruled by settings that are
Note:
sent along with the print job.
The optional stamp unit allows you to print a predefined text on all your copies.
The content of stamps can be created and modified by your key operator. This
may be useful if you want to have the date, time or other information printed
on your copies. There are 50 programmable stamps available.
This section describes how to select a stamp and how to modify its layout (i.e.
size, grayscale and position).
The key operator can define the contents of a stamp (see 'Editing the
Note:
stamp' on page 71).
Selecting default stamp option
Open the 'Stamp' card in the 'Finishing' section.
1
Select 'Select' by pressing the function button 'Stamp' one or more times (see
2
figure 41).
Prints:
Ready to print
0
High cap.
stacker
Stamp
Layout
Fold
Delivery
Select
......................................................................................................................................
Fold
Stamp
[41] Selecting a stamp
Select one of the available stamps by using the higher/lower buttons.
3
If required, press the function button 'Stamp' again to adjust the layout: size,
4
greyscale and position (see figure 42).
Default printer settings
................
Machine
49
50
01/01/96
1
01/01/96 12:00
2
3
Confidential
................
.................
Program
Finishing
................
Copy
45