Handling A4 Formats - Oce 9800 User Manual

Handling A4 formats

When an A4 format must be reinforced the format will exceed the A4 DIN
standard. Because this is not always desired the A4 format can be handled
differently.
The following options can be selected in the 'Action for reinf. A4' menu:
Option deselected
Reinforce
Punch
punch unit is installed)
These options will only have effect when the reinforce option is selected
Note:
by the user. For more information see 'Reinforcement Unit (optional)' on
page 53.
Setting reinforcement for A4 formats
Open the 'Fold delivery' card in the 'Finishing' section.
1
Select the desired reinforcement option or deselect the option by pressing the
2
'Action for reinf. A4' button (see figure 69).
Copies:
Ready to copy
0
Stamp
Fold
delivery
......................................................................................................................................
Fold
Clean
reinf. knife
[69] Setting reinforcement for A4 formats
When ready, quit the key operator mode.
Key operator
A4 formats will be punched nor reinforced.
All A4 prints or copies will be reinforced.
All A4 prints or copies will be punched. (only available if the optional
Reinforce
Punch
Action for
reinf. A4
................ ................
Machine Program
Belts
Belt 2
Belt 1
Stack
Print
delivery
width
................
................
Copy
Finishing
Belts
Belt 2
Belt 1
Stack
Copy
delivery
75