Defining Automatic Roll Change - Oce 9800 User Manual

Defining automatic roll change

By switching 'Automatic roll change' on, the printer will switch to another roll
of the same format and copy material when the roll becomes empty during
printing. Switching off 'Automatic roll change' causes the machine to stop
printing when the selected roll is empty and asks you to load a new roll.
The machine cannot detect the loaded copy material type. This should be
Note:
specified when loading a roll of copy material, as described in 'Defining the
type of material' on page 93.
Switching 'Automatic roll change' on/off
Open the 'Copy size' card in the 'Copy' section.
1
Press the function button 'Automatic roll change' to switch on or off (see
2
figure 67).
Prints:
Ready to print
0
Image
Copy
material
Copy
Automatic
size
roll change
[67] Switching 'Automatic roll change' on/off
When ready, quit the key operator mode.
3
Key operator
................
Machine
A4 >> A2
A3 >>
A2
210 mm
A2
A2 >>
A1 >> A2 Standard cut
A2
A0 >> Synchro cut
Copy
Auto format
selection length
selection
................
................
Program Finishing
................
Copy
73