Oce 9800 User Manual page 135

Check if there are loose reinforcement strips in the unit with the protection
3
sheet still on (see situation B in figure 153).
[153] Situation A: No mechanical error
If there are, remove the tape strips in the Reinforcement Unit.
4
If the protection sheet is not on the reinforcement strip (see situation
Note:
A in figure 153), there is no mechanical error and you should insert a new
tape roll as described in 'Inserting a new tape roll' on page 97. If this error
frequently occurs you should call the Océ service organisation (see 'Other
problems (call service)' on page 136).
Remove all tape between the rollers and knives (see figure 154).
5
[154] Removing the tape
Lead a new trailing edge of tape between the rollers and knives. For more
6
information see 'Inserting a new tape roll' on page 97.
Problem solving
Situation B: Mechanical error
135