Oce 9800 User Manual page 99

Remove the trailing edge of the old tape (see figure 92).
3
[92] Removing the trailing edge of the old tape
It is recommended that you clean the reinforcement knives before placing a
4
new roll. For more information about cleaning the knives see 'Cleaning the
reinforcement knives' on page 106
Unscrew the front side plate of the roll holder with the green knurled nut and
5
remove the old kernel.
Place the new roll and close the side plate. Make sure that the roll is placed with
6
the holes to the back and the protection sheet to the front (see figure 93).
[93] Placing the new roll
Maintenance 99