Power-Up Sequence; Limitations; Figure 7- Compatible Device Combinations - Network Technologies UNIMUX-USBV-xO Installation And Operation Manual

NTI UNIMUX SERIES USB KVM SWITCH

Power-Up Sequence

•
The UNIMUX can be powered at any time.
•
The CPUs can be powered at any time although if a CPU needs a keyboard and/or mouse at power-ON it should be powered
after connecting to and powering-ON the UNIMUX.
•
USB input devices (keyboard and mouse) can be hot plugged to and from the UNIMUX at any time.
Immediately after powering ON the UNIMUX, the following splash screen will appear on the monitor (except on 2-port model):
If the security option is enabled (see page 12 for details on the
"Security Option"), when the UNIMUX is powered up the user will
be prompted for a username and password to continue.
security option is not enabled the monitor will display the desktop
image for the connected CPU and the user can continue with
normal operation of the connected CPU.

Limitations

•
Only USB input device or hub cables can be connected to the UNIMUX at the USB Type A female ports labeled "DEVICES".
(See Features and Functions on page 3, item 11.)
•
A USB hub (single or multi-port) can be used provided only USB input devices are plugged into it.
•
Only a USB Windows or SUN keyboard or USB mouse may be connected to the USB port on a USB MAC keyboard
•
A maximum of 8 input devices may be connected to the UNIMUX either directly or through hubs.
See Fig. 7 for some examples of input device combinations that can be used with the UNIMUX.
USB Type A
Male Connectors
USB Windows Keyboard
Typical Installation- 1 Keyboard, 1 Mouse
USB MAC Keyboard
USB Windows Keyboard
USB
Mouse
Optional- Multiple keyboards and mice
USB MAC Keyboard

Figure 7- Compatible device combinations

If the
USB
Hub
USB
Mouse
USB
USB Windows Keyboard
Mouse
7
USB MAC Keyboard
Optional- MAC USB keyboard and mouse
2 USB hubs in series (Daisy-Chained)
USB
Mouse