Cpu Connection; Vopex-Usbv; Hub Ports; Power-Up - Network Technologies VOPEX-USBV-2 Installation And Operation Manual

NTI VOPEX-USBV-2 KVM SPLITTER

CPU Connection

Connect the male USB type A connector end of the USB-AB-1M-ST cable into the device port on the CPU.
1.
Connect the male USB type B connector of the same cable to the "CPU" port on the VOPEX.
2.
Connect the male 15HD connector end of the VEXT-3 into the CPU's video port. (See Fig. 2)
3.
Connect the female 15HD connector end of the VEXT-3 into the "VIDEO" port on the VOPEX.
4.

Hub Ports

If desired, connect additional USB devices to
each of the three "Hub Ports". These ports
will be powered and operational anytime the VOPEX
and CPU are powered ON. See Fig. 3.

Power-Up

If not already ON, turn ON power to the CPU,
monitors, and VOPEX.

Figure 2- Connect the VOPEX to the CPU

Figure 3- Connect other devices to Hub Ports

4