Upgrading Acu - Cisco Aironet Installation And Configuration Manual

ACU Procedures

Upgrading ACU

Follow the instructions in this section to upgrade ACU to a more recent version.
Note If you create profiles using ACU version 5.0 (or greater), these profiles are saved if you upgrade to
a more recent version of ACU.
Step 1 Close any Windows programs that are running.
Perform one of the following:
Step 2
•
•
Select Start > Run, enter or browse to the path where you extracted the files (for example,
Step 3
C:\temp\setup.exe), and click OK. The Aironet Client Utility Setup screen and the InstallShield Wizard
appear.
When the Welcome screen appears, click Next.
Step 4
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
8-24
If you are installing ACU from a bundled file on Cisco.com, follow the steps below:
Using Windows Explorer, find the folders that were extracted from the bundle and double-click
a.
the ACU folder.
Go to Step 3.
b.
If you are installing ACU from an individual file on Cisco.com, follow the steps below:
a. Use the computer's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
b. Click the link for Cisco Aironet Wireless LAN Client Adapters.
c. Click the link for the Windows utility.
d. Select the latest ACU file.
e. Read and accept the terms and conditions of the Software License Agreement.
Select the ACU file again to download it.
f.
Save the file to your computer's hard drive.
g.
Find the file using Windows Explorer, double-click it, and extract its files to a folder.
h.
Go to Step 3.
i.
Chapter 8 Routine Procedures
OL-1394-04