Cisco Aironet Wireless LAN Client Installation And Configuration Manual
Wireless lan client adapters, guide for ms-dos
Hide thumbs
Also See for Cisco Aironet Wireless LAN Client:
- Installation and configuration manual (290 pages) ,
- Quick start manual (12 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Cisco Cisco Aironet Wireless LAN Client
Summary of Contents for Cisco Cisco Aironet Wireless LAN Client
- Page 1 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: OL-1744-02...
- Page 2 FastTrack, the iQ Logo, iQ Net Readiness Scorecard, Networking Academy, ScriptShare, SMARTnet, TransPath, and Voice LAN are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, Discover All That’s Possible, The Fastest Way to Increase Your Internet Quotient, and iQuick Study are service marks of Cisco Systems, Inc.;...
-
Page 3: Table Of Contents
Data Transparency and Protocols Protocols Supported Security Features System Configurations Ad Hoc Wireless LAN Wireless Infrastructure Wireless Infrastructure with Workstations Accessing a Wired LAN Extended Infrastructure Using Repeaters Cisco Aironet Wireless LAN Client Adapters Installtion and Configuration Guide for MS-DOS OL-1744-02... - Page 4 Additional Requirements and Features Driver Keywords and Settings Basic System Parameters Network Performance Variables Fragmentation Variables Power Management Variables 3-10 Scanning Variables 3-12 Infrastructure Parameters 3-13 Ad Hoc Variables 3-16 Cisco Aironet Wireless LAN Client Adapters Installtion and Configuration Guide for MS-DOS OL-1744-02...
- Page 5 A P P E N D I X Technical Specifications Channels, Power Levels, Antenna Gains A P P E N D I X Channel Sets Maximum Power Levels and Antenna Gains Cisco Aironet Wireless LAN Client Adapters Installtion and Configuration Guide for MS-DOS OL-1744-02...
- Page 6 Translated Safety Warnings A P P E N D I X Explosive Device Proximity Warning Lightning Activity Warning Installation Warning Circuit Breaker (15A) Warning N D E X Cisco Aironet Wireless LAN Client Adapters Installtion and Configuration Guide for MS-DOS OL-1744-02...
- Page 7 Preface This preface provides an overview of the Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS, references related publications, and explains how to obtain other documentation and technical assistance, if necessary. These topics are covered in this section: Audience, page vi •...
-
Page 8: Preface
Audience Audience This publication is for the person responsible for installing, maintaining, and configuring a Cisco Aironet Wireless LAN Adapter (also referred to as an adapter or client adapter) on a computer using the MS-DOS operating system. The installer should be familiar with MS-DOS, computing devices and with network terms and concepts. -
Page 9: Related Publications
User’s Guide and Technical Reference Manual Aironet Wireless LAN Adapter PC4500 and PC4800 • Obtaining Documentation The following sections provide sources for obtaining documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following sites: http://www.cisco.com • http://www-china.cisco.com •... -
Page 10: Ordering Documentation
800-553-NETS(6387). Documentation Feedback If you are reading Cisco product documentation on the World Wide Web, you can submit technical comments electronically. Click Feedback in the toolbar and select Documentation. After you complete the form, click Submit to send it to Cisco. -
Page 11: Technical Assistance Center
P4—You need information or assistance on Cisco product capabilities, product installation, or basic • product configuration. In each of the above cases, use the Cisco TAC website to quickly find answers to your questions. To register for Cisco.com, go to the following website: http://www.cisco.com/register/ If you cannot resolve your technical issue by using the TAC online resources, Cisco.com registered users... - Page 12 Preface Obtaining Technical Assistance Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
- Page 13 C H A P T E R Overview This chapter describes the Cisco Aironet Wireless LAN Client Adapter, also referred to as an adapter or client adapter, and illustrates its role in a wireless network. These topics are covered in this section: •...
-
Page 14: Chapter 1 Overview
Introduction to the Wireless LAN Adapters Introduction to the Wireless LAN Adapters The Cisco Aironet Wireless LAN Client Adapters, also referred to as adapters, are radio modules that provide transparent, wireless, data communications between fixed, portable, or mobile devices and other wireless devices or a wired network infrastructure. -
Page 15: Terminology
For example, if a particular frequency encounters noise, interference, or both, enough redundancy is built into the signal on other frequencies that the client adapter usually is successful in its transmission. Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 16: Radio Antenna
Antenna Type and Placement—Proper antenna configuration is a critical factor in maximizing radio • range. As a general guide, range increases in proportion to antenna height. Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 17: Link Test
Adapter. Protocols Supported The Cisco Aironet Wireless LAN Client Adapter can be used in a variety of infrastructure configurations. Cisco Aironet access points provide connections to Ethernet Networks. When using the Cisco Aironet standard device drivers, the PC Card is fully compliant with the protocols and wired... -
Page 18: Security Features
SSID cannot directly communicate with each other. System Configurations The Cisco Aironet Wireless LAN Client Adapter can be used in a variety of network system configurations. Access points provide connections to your Ethernet networks or act as repeaters increasing wireless communication range. -
Page 19: Wireless Infrastructure
This is referred to as seamless roaming. Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 20: Extended Infrastructure Using Repeaters
Multiple repeater hops can be supported in the path to the wired LAN. Figure 1-4 Extended Infrastructure Using Repeaters Access Point (Root Unit) Wired LAN Access Point (Repeater) Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 21: Coverage Options
If the access point fails, the station automatically roams to an operational access point. With this system architecture, all access points and PC Card units must be configured with the same SSID. Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 22: Multiple Overlapping Systems Coverage
SSIDs and different channels, which prevent clients from roaming to access points of a different wireless system. Figure 1-7 Multiple Overlapping Systems Coverage Option Wired LAN 2 Wired LAN 1 Cisco Aironet Wireless LAN Adapters Installation and Configuration Guide for MS-DOS 1-10 OL-1744-02... -
Page 23: Chapter 2 Installing The Hardware
C H A P T E R Installing the Hardware This section describes the procedures for installing the Cisco Aironet Wireless LAN Client Adapter. These topics are covered in this section: Safety Information, page 2-2 • Unpacking the Client Adapter, page 2-3 •... -
Page 24: Safety Information
Do not operate your wireless network device near unshielded blasting caps or in an explosive Warning environment unless the device has been modified to be especially qualified for such use. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 25: Other Devices In The Wireless Network
Check each item for damage. Note If any item is damaged or missing, notify your authorized Cisco sales representative. Any remote antenna and its associated wiring are shipped separately. Package Contents Each client adapter is shipped with the following items: •... -
Page 26: Antenna Connectors
The two antenna connectors allow a Diversity Antenna or two separate antennas to be attached to the Cisco Aironet Wireless LAN Adapter. When two antennas are connected, the adapter automatically selects antennas to provide the strongest signal for radio operations. This feature improves packet delivery and system throughput by avoiding reception and transmission instances that are hampered by RF multipath signals or blocking structures in the environment. -
Page 27: Detaching A Remote Antenna
Caution the slot. If the PC card does not insert easily, remove the card and reinsert it. Hold the PC card with the Cisco logo facing up and insert it into the PC card slot, applying just enough Step 3 pressure to make sure it is fully seated. -
Page 28: Inserting A Pci Client Adapter
See Figure 2-3. Figure 2-3 Inserting a PCI Client Adapter into a PC Antenna connector Card edge LEDs connector Standard 2 dBi dipole antenna Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 29: Removing The Client Adapter
To ensure that your computer is completely shut down, unplug the computer’s power cord from its power source. Step 2 Disconnect the client adapter’s antenna. Step 3 Remove the computer cover. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... - Page 30 Pull up firmly on the client adapter to release it from the slot, and carefully tilt the adapter to allow it to clear the opening in the CPU back panel. Step 6 Reinstall the screw on the CPU back panel, and replace the computer cover. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 31: Installing The Software
• DOS NDIS2 Installation, page 3-3 • • ODI Driver Installation, page 3-5 • Additional Requirements and Features, page 3-5 • Driver Keywords and Settings, page 3-6 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 32: Chapter 3 Installing The Software
Turns the PCMCIA slot on or off to allow utilities to access the adapter RADINFO.COM Displays the adapter’s radio statistics WEPDOS.EXE Sets a WEP transmit key and key values Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 33: Windows For Workgroups 3.11 Ndis2 Installation
If the drivers are already copied to the hard disk, they are displayed in the list. Step 9 Under Add Adapter, choose the appropriate Cisco Aironet Adapter. If it is not on the menu list, choose Unlisted or Updated Network Driver. Choose the correct Cisco Aironet Adapter, and click OK. -
Page 34: Dos Packet Driver Installation
Extract the NDIS.EXE files to the directory containing the network files on your computer’s hard drive. Step 2 Step 3 Copy the PROTOCOL.INI file to the network directory or merge statements from the Cisco Aironet supplied file into your existing PROTOCOL.INI file. Step 4 Modify the CONFIG.SYS file. -
Page 35: Odi Driver Installation
Extract the CSCODI.COM files to the directory containing the network files on your computer’s hard Step 2 drive. Copy the NET.CFG file, or merge the Cisco Aironet supplied NET.CFG file into your existing NET.CFG Step 3 file in the network directory. -
Page 36: Driver Keywords And Settings
Fragment frames longer than 700 bytes. • Discard fragmented transmit packets if not delivered in 5 seconds. Discard fragmented receive frames if not complete after 10 seconds. • Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 37: Basic System Parameters
(Optional)—Specifies the rate at which the adapter communicates with the access point to DATARATE2 0–255 which it associates. Default: 1–11 This setting must match the access point’s setting. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 38: Network Performance Variables
Left = Adapter uses the antenna attached to jack 2 Default: ON LEAP ON (YES) (Optional)—turns LEAP (Cisco’s version of Extensible Authentication Protocol) on or off. OFF (NO) Default: OFF Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 39: Fragmentation Variables
Description FRAGTHRESHOLD 256–312 (Optional)—Specifies the fragmentation size (must be an even value) in bytes. Frames longer than the specified value are transmitted using multiple packets. Default: 700 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 40: Power Management Variables
MAXPOWERSAVE conserves the most power but offers the lowest throughput. Is recommended for devices for which power consumption is the ultimate concern (such as small battery-powered devices). Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-10 OL-1744-02... - Page 41 100 Kusec (100 ms) Used only in INFRASTRUCTURE mode when POWERSAVE mode is PSP or FASTPSP. The PC Card always awakens to receive DTIMs when in FASTPSP Mode. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-11 OL-1744-02...
-
Page 42: Scanning Variables
(Optional)—Determines the amount of time to wait for a probe response after energy is detected on a channel. Default: 20 Kusec Used only if SCANMODE = ACTIVE Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-12 OL-1744-02... -
Page 43: Infrastructure Parameters
(Optional)—Forces association to the except broadcast and specified access point. multicast SPECIFIEDAP2 Any IEEE MAC address (Optional)—Forces association to one of the except broadcast and specified access points. multicast Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-13 OL-1744-02... - Page 44 (with matching SSID. Default: 10,000 Kusec (10 sec) AUTHTIMEOUT 0–0xFFFF (Optional)—Establishes the time to attempt to authenticate to an access point. Default: 2,000 Kusec (2 sec) Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-14 OL-1744-02...
- Page 45 (Optional)—Shows the maximum amount of time that the client waits for a response to an association request from the access point. Default: 2,000 Kusec (2 sec) Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-15 OL-1744-02...
-
Page 46: Ad Hoc Variables
When joining a network, the value currently in use is adopted. Adapter Keywords The following is a list of keywords that control the host system hardware resources the Cisco Aironet Wireless LAN Adapter requires. Note At a minimum, the adapter requires 64 consecutive 16-bit I/O ports, one nonsharable Interrupt and one PC Card type II slot. - Page 47 PC Card CIS. Default: 0xD000 In the NET.CFG file, the parameter is D0000, not 0xD000. 0xC00–0xDF00 Same as MEMORY. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-17 OL-1744-02...
- Page 48 Chapter 3 Installing the Software Driver Keywords and Settings Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 3-18 OL-1744-02...
- Page 49 These topics are covered in this section: • Site Survey and Link Test, page 4-2 Loading New Firmware Versions, page 4-3 • DOS Utilities, page 4-3 • Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 50: Chapter 4 Utilitie
Start a Telnet session on the mobile station to the access point. Depending on the system in use, the Telnet application might have logging and note taking capability. If so, enable these modes. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 51: Loading New Firmware Versions
WEPDOS.EXE—sets a WEP transmit key and key values AWCALLID.EXE—establishes a call ID number • The following utility does not ship with the drivers. To obtain it, contact your local Cisco System Engineer. • AWCLEAP.EXE—sets and clears LEAP username and passwords... -
Page 52: Diagnostic Utilities
Standard options are available when they are displayed as part of the command or when using the help (-?) option. Remarks This section contains information about the utility that can help the user. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 53: General Usage Notes
Most of the utilities do not actually require the use of an interrupt. Getting Help Use the -? option to display a brief explanation of the utility and its command syntax. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 54: Configuration Utilities
The card startup option (-365) is required to run this utility. This utility is not shipped with the drivers. To obtain it, contact your local Cisco System Engineer. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 55: Awcallid.exe
A valid call ID produces this message: Callid:<callid string> This program is only required in Japan and only when the Note adapter is used in a legacy network. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 56: Awcallid.exe
A valid call ID produces this message: Callid:<callid string> This program is only required in Japan and only when the Note adapter is used in a legacy network. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 57: Wepdos.exe
C:>WEPDOS -365 -p180 -tx1 Setting transmit key index to 1 C:>WEPDOS -365 -p180 -d WEP128 encryption is enabled. Enterprise and home networking is supported. Firmware supports four keys. C:\> Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 58: Diagnostic Utilities
The following example shows the proper command syntax to turn the slot on, run a utility program, and turn the card off: PCMCIA ON -BOOT RADINFO PCMCIA OFF Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 4-10 OL-1744-02... -
Page 59: Radinfo.exe
Product Code: Mercury Hardware Version: Rev. B1 Processor Version: A503 Bootblock Revision: Rev. 1.50 Firmware Revision: Rev. 4.23 MAC Address: 04 40 96 47 93 E5 C:\> Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 4-11 OL-1744-02... - Page 60 Chapter 4 Utilities DOS Utilities Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS 4-12 OL-1744-02...
-
Page 61: Chapter 5 Error Messages And Trouble Shooting
These topics are covered in this section: • Accessing the Latest Troubleshooting Information, page 5-2 Interpreting the Indicator LEDs, page 5-2 • If Your Radio Fails to Establish Contact, page 5-3 • Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 62: Accessing The Latest Troubleshooting Information
PHY access error. Refer to the “Obtaining 2-second pause Technical Assistance” section in the Preface for technical support information. 6 fast blinks, Incompatible firmware. Load the correct 2-second pause firmware version. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 63: If Your Radio Fails To Establish Contact
Check that all parameters are set properly for both the adapter and the access point. • If the radio still fails to establish contact, see the “Accessing the Latest Troubleshooting Information” section on page 5-2. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... - Page 64 Chapter 5 Error Messages and Trouble Shooting Interpreting the Indicator LEDs Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 65: Appendix
A P P E N D I X Technical Specifications This appendix provides technical specifications for the Cisco Aironet Wireless LAN Client Adapters. These topics are covered in this section: Physical Specifications, page A-2 • Radio Specifications, page A-2 •... -
Page 66: Technical Specifications
Cisco Aironet Wireless LAN Client Adapters. If a distinction is not made between series or client adapter type, the specification applies to all Cisco Aironet Wireless LAN Client Adapters in the 340 and 350 series... - Page 67 –83 dBm at 11 Mbps Receiver sensitivity 350 series adapters –94 dBm at 1 Mbps –91 dBm at 2 Mbps –89 dBm at 5.5 Mbps –85 dBm at 11 Mbps Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
- Page 68 Transmit current steady state 340 series PC card and LM card Typically 350 mA at 15 dBm 340 series PCI client adapter Typically 450 mA at 15 dBm Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
- Page 69 AS/NZS 3548 Class B VCCI Class B EN 55024 Radio approvals FCC Part 15.247 Canada RSS-139-1, RSS-210 Japan Telec 33A EN 300.328 RF exposure OET-65C RSS-102 ANSI C95.1 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
- Page 70 Appendix A Technical Specifications Technical Specifications Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 71: Appendix
The following topics are covered in this appendix: • Channel Sets, page B-2 Maximum Power Levels and Antenna Gains, page B-3 • Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 72: Channel Sets
France is included in the ETSI regulatory domain; however, only channels 10 through 13 can be used Note in France. Users are responsible for ensuring that the channel set configuration is in compliance with the regulatory standards of France. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 73: Appendix B Channel, Power Level, Antenna Gain
Antenna Gain (dBi) Maximum Power Level (mW) Americas (-A) (4 watts EIRP maximum) 13.5 ETSI (-E) (100 mW EIRP maximum) 13.5 Israel (-I) (100 mW EIRP maximum) 13.5 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... - Page 74 Maximum Power Levels Per Antenna Gain (continued) Regulatory Domain Antenna Gain (dBi) Maximum Power Level (mW) China (-C) (10 mW EIRP maximum) 13.5 Japan (-J) (10 mW/MHz EIRP maximum) 13.5 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 75: Appendix
European Community, Switzerland, Norway, Iceland, and Liechtenstein, page C-4 • • Declaration of Conformity for RF Exposure, page C-6 Guidelines for Operating Cisco Aironet Wireless LAN Client Adapters in Japan, page C-7 • Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 76: Manufacturers Federal Communication Commission Declaration Of Conformity Statement
The Part 15 radio device operates on a non-interference basis with other devices operating at this Caution frequency. Any changes or modification to said product not expressly approved by Cisco could void the user’s authority to operate this device. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS... -
Page 77: Department Of Communications - Canada
The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system according to the Canadian regulations. For further information, contact your local Industry Canada office. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 78: European Community, Switzerland, Norway, Iceland, And Liechtenstein
Declarations of Conformity and Regulatory Information European Community, Switzerland, Norway, Iceland, and Liechtenstein European Community, Switzerland, Norway, Iceland, and Liechtenstein Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... - Page 79 The following CE mark is affixed to the 350 series equipment (except for the mini-PCI card): The above CE mark is required as of April 8, 2000 but might change in the future. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 80: Declaration Of Conformity For Rf Exposure
This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted Note to certain frequencies or may require a license for operation. For more details, contact Cisco Corporate Compliance. Combinations of power levels and antennas resulting in a radiated power level of above 100 mW... -
Page 81: Guidelines For Operating Cisco Aironet Wireless Lan Client Adapters In Japan
Guidelines for Operating Cisco Aironet Wireless LAN Client Adapters in Japan Guidelines for Operating Cisco Aironet Wireless LAN Client Adapters in Japan This section provides guidelines for avoiding interference when operating Cisco Aironet Wireless LAN Client Adapters in Japan. These guidelines are provided in both Japanese and English. Japanese Translation... - Page 82 Appendix C Declarations of Conformity and Regulatory Information Guidelines for Operating Cisco Aironet Wireless LAN Client Adapters in Japan Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 83: Appendix
These topics are covered in this section: • Explosive Device Proximity Warning, page D-2 Lightning Activity Warning, page D-3 • Installation Warning, page D-3 • • Circuit Breaker (15A) Warning, page D-4 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 84: Explosive Device Proximity Warning
Varning! Använd inte den trådlösa nätverksenheten i närheten av oskyddade tändhattar eller i en explosiv miljö om inte enheten modifierats för att kunna användas i sådana sammanhang. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 85: Lightning Activity Warning
Read the installation instructions before you connect the system to its power source. Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de voeding verbindt. Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen. Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... -
Page 86: Circuit Breaker (15A) Warning
Vérifier qu'un fusible ou qu'un disjoncteur de 120 V alt., 15 A U.S. maximum (240 V alt., 10 A international) est utilisé sur les conducteurs de phase (conducteurs de charge). Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02... - Page 87 (överströmsskydd). Kontrollera att säkring eller överspänningsskydd används på fasledarna (samtliga strömförande ledare) för internationellt bruk max. 240 V växelström, 10 A (i USA max. 120 V växelström, 15 A). Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
- Page 88 Appendix D Translated Safety Warnings Circuit Breaker (15A) Warning Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS OL-1744-02...
-
Page 89: I N D E X
B-3 to B-4 heavy overlap minimal overlap multiple overlapping systems 1-10 declaration of conformity statement firmware data rates loading new versions data transparency and protocols fragmentation variables Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS IN-1 OL-1744-02... - Page 90 RF exposure declaration of conformity statement antenna safety information NDIS2 driver FCC safety compliance statement MS-DOS installation guidelines Windows for Workgroups installation specifications network performance variables Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS IN-2 OL-1744-02...
- Page 91 4-1 to 4-11 site survey and link test warnings WEPDOS.EXE wireless LAN adapter antenna connectors inserting into computing device 2-5 to 2-7 Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS IN-3 OL-1744-02...
- Page 92 Index Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS IN-4 OL-1744-02...