Setting Rf Network Parameters - Cisco Aironet Installation And Configuration Manual

Setting RF Network Parameters

Table 5-2
Parameter
Network Type
Go to the next section to set additional parameters or click OK to return to the Profile Manager screen.
On the Profile Manager screen, click OK or Apply to save your changes.

Setting RF Network Parameters

The RF Network screen (see
client adapter transmits and receives data. To access this screen, select the RF Network tab from the
Properties screens.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-6
System Parameters (continued)
Description
Specifies the type of network in which your client adapter is installed.
Options: Ad Hoc or Infrastructure
Default: Infrastructure
Network Type
Ad Hoc
Infrastructure
Figure 5-2) enables you to set parameters that control how and when the
Chapter 5 Configuring the Client Adapter
Description
Often referred to as peer to peer. Indicates
that your wireless network consists of a
few wireless devices that are not
connected to a wired Ethernet network
through an access point. For example, an
ad hoc network could be set up between
computers in a conference room so users
can share information in a meeting.
Indicates that your wireless network is
connected to a wired Ethernet network
through an access point.
OL-1394-04