Cisco Aironet Installation And Configuration Manual page 168

Driver Procedures
Step 13 When prompted to restart your computer, click No.
Step 14 Remove the CD from your computer's CD-ROM drive.
Step 15 Shut down your computer.
Step 16 Remove the client adapter.
Uninstalling the 6.10 Driver for Windows 2000
Step 1 Make sure the client adapter is in your computer and the computer is booted up.
Step 2 Right-click the WepStat icon in the system tray on your desktop. This icon looks like two connected
computers.
Step 3 Click Terminate.
Step 4 Insert the CD that contains the 6.10 driver into your computer's CD-ROM drive.
Step 5 Open Windows Explorer.
Step 6 Click Tools, Folder Options, and View.
Under Hidden files and folders, make sure Show hidden files and folders is selected, make sure the
Step 7
Hide file extensions for known file types check box is deselected, and click OK.
Find the \Utilities\RmWep directory on your computer's CD-ROM drive.
Step 8
Double-click the RmWep.exe file.
Step 9
Go to C:\Windows\Inf and double-click the oemx.inf and oemx.pnf files, where x equals a numeral, to
Step 10
open them.
Delete the oemx.inf and oemx.pnf files that are labeled Aironet and are for a wireless LAN adapter.
Step 11
Remove the CD from your computer's CD-ROM drive.
Step 12
Step 13 If you are prompted to restart your computer, click Yes.
Step 14 When the computer restarts, double-click My Computer, Control Panel, and Add/Remove
Hardware.
Step 15 In the Add/Remove Hardware Wizard window, click Next.
Step 16 Click Uninstall/Unplug a device. Click Next.
Step 17 Click Uninstall a device. Click Next.
Step 18 From the Devices list, select the Cisco Systems Wireless LAN Adapter. Click Next.
Click Yes, I want to uninstall this device. Click Next.
Step 19
Click Finish.
Step 20
Shut down your computer.
Step 21
Remove the client adapter.
Step 22
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
8-16
Chapter 8 Routine Procedures
OL-1394-04