Cisco Aironet Installation And Configuration Manual page 138

Viewing the Current Status of Your Client Adapter
Table 7-3
Status
Server Based Authentication
WEP (Wired Equivalent
Privacy)
Authentication Type
Antenna Selection
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
7-8
Client Adapter Status (continued)
Description
Indicates the configuration of the access point to which your client
adapter is associated.
Value:
Server Based Authentication
None
WEP Key In Use
Cell Is Secure
LEAP Authenticated
Your client adapter's current WEP status.
Value:
Note
Indicates whether the client adapter must share the same WEP keys as
the access point in order to communicate or can communicate with the
access point regardless of its WEP settings.
Value:
Note
The antenna mode that your client adapter is currently using.
Value:
Note
Note
None, WEP Key In Use, Cell Is Secure, or LEAP
Authenticated
Description
The access point is configured for No
Encryption.
The access point is configured for
Optional encryption.
The access point is configured for Full
Encryption.
Note
The client is using LEAP and is
authenticated to an access point that has
WEP and Network-EAP enabled.
Enabled, Not Enabled, or Need Firmware Upgrade
Refer to the "Setting Network Security Parameters" section on
page 5-20 for information on enabling WEP.
Open or Shared Key
Refer to the "Setting Network Security Parameters" section on
page 5-20 for information on setting the authentication type.
Diversity, Primary Only, Secondary Only
(Primary Only is the only option available for PCI client
adapters)
This setting appears only for 2.4-GHz client adapters.
The Primary Only and Secondary Only values were formerly
named Right Only and Left Only, respectively. Refer to the
Antenna Mode (Receive) and Antenna Mode (Transmit)
parameters in Table 5-4 and
setting the antenna mode.
Chapter 7 Performing Diagnostics
If the client's current profile does
not have Allow Association To
Mixed Cells enabled, the client
can associate only to access points
that use full encryption.
Table 5-5 for information on
OL-1394-04