Verifying Installation - Cisco Aironet Installation And Configuration Manual

Chapter 3 Installing the Client Adapter
Step 5 In the Choose Destination Location screen, perform one of the following:
•
•
Step 6 In the Select Program Folder screen, specify a program folder name for ACU by selecting from the list
of existing folders (the default name is Cisco Aironet) or entering a new folder name; then click Next.
A status screen displays the progress of the installation. Then one of two Setup Complete screens
appears, depending on whether Windows needs to be restarted to complete the installation.
Step 7 Perform one of the following:
•
•
The driver and client utility installation is complete. The client adapter has been installed and configured
Step 8
for basic operation. Go to the
successful. After you verify installation, go to
adapter.

Verifying Installation

To verify that you have properly installed the driver and ACU and minimally configured your client
adapter, check the client adapter's LEDs. If the installation was successful, the client adapter's green
LED blinks.
If your installation was unsuccessful or you experienced problems during or after driver
Note
installation, refer to
Go to
If two client adapters (such as a mini PCI card and a PC-Cardbus card) are installed in your computer,
Note
you must specify the one for which you currently wish to set up profiles in ACU. Go to the
from Two Installed Client Adapters" section on page 3-24
OL-1394-04
If you want the ACU program files to be installed in the default location (C:\Program Files, provided
C:\Program Files is the default Windows program file folder), click Next.
If you want to specify a different destination location for the ACU program files, click Browse,
select a location, and click Next.
If your computer does not need to be rebooted, select either of the following options and click
Finish:
Option
View the README.TXT file
Launch the Aironet Client Utility
If your computer needs to be rebooted, select Yes, I want to restart my computer now or No, I will
restart my computer later, remove the CD (if installed), and click Finish.
If you are prompted to reboot your computer, Cisco recommends that you select the Yes, I
Note
want to restart my computer now option.

"Verifying Installation"

Chapter 9
Chapter 4 if you want to create profiles for your client adapter.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Description
Opens a read-me file containing information about ACU.
Opens ACU so you can configure your client adapter.
section below to determine if the installation was
Chapter 4
for troubleshooting information.
Verifying Installation
if you want to create profiles for your client
for instructions.
"Selecting
3-23