Uninstalling A Driver Other Than The 6.10 Driver - Cisco Aironet Installation And Configuration Manual

Chapter 8 Routine Procedures

Uninstalling a Driver Other Than the 6.10 Driver

To uninstall a driver other than the 6.10 driver, follow the instructions that apply to your computer's
operating system.
When you uninstall the driver, any saved profiles are lost.
Note
Uninstalling the Driver for Windows 95, 98, and Me
Note This procedure does not uninstall the driver that was bundled with Windows Me. It uninstalls only
drivers to which you have upgraded. When you follow the steps below to uninstall an upgraded driver
and then eject and reinsert the card, Windows Me finds the original driver and reinstalls it
automatically.
Step 1 Double-click My Computer, Control Panel, and Network.
In the Network window, select the Cisco Systems Wireless LAN Adapter.
Step 2
Step 3 Click Remove and OK.
Step 4 When prompted to restart your computer, click No.
Step 5 Open Windows Explorer.
If your computer's operating system is Windows 95 or 98, click View, Options or Folder Options, and
Step 6
View. Under Hidden files, make sure Show all files is selected and click OK.
Find your computer's operating system in the following table, go to the path listed, and delete the file
Step 7
indicated.
Operating System
Windows 98
Windows Me
Step 8 Find your computer's operating system in the following table and delete any pcx50*.sys files from the
path indicated.
Operating System
Windows 95
Windows 98
Windows Me
Step 9 Restart your computer.
OL-1394-04
Location of File
C:\Windows\Inf or
C:\Windows\Inf\Other
C:\Windows\Inf\Other
Location of pcx50*.sys Files
C:\Windows\System\pcx50*.sys
C:\Windows\System\pcx50*.sys
C:\Windows\System32\Drivers\pcx50*.sys
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
File to be Deleted
pc4800.inf, aironetnetx500.inf,
cisconetx500.inf, or CisconetA504.inf
aironetnetx500.inf, cisconetx500.inf, or
CisconetA504.inf
Driver Procedures
8-17