Windows 95 Version B - Cisco Aironet Installation And Configuration Manual

Installing the Driver
Step 8 If you are prompted to insert the Windows 95 operating system disk, click OK and do one of the
following:
•
•
After the files are copied, remove any disks from your computer.
Step 9
Double-click My Computer, Control Panel, and Network.
Step 10
Step 11 Select the Cisco Systems Wireless LAN Adapter and click Properties.
Step 12 In the client adapter Properties window, click the Advanced tab.
Step 13 Select Client Name. Type your computer's unique client name, which can be obtained from your system
administrator, in the Value dialog box.
Step 14 Select SSID. Type your RF network's (case-sensitive) SSID, which can be obtained from your system
administrator, in the Value dialog box.
Step 15 Click OK.
Step 16 If you are prompted to restart your computer, click Yes.
Step 17 If your computer is not connected to a DHCP server and you plan to use TCP/IP, double-click My
Computer, Control Panel, and Network. Select TCP/IP > Cisco Systems Wireless LAN Adapter.
Click the Properties button, select Specify an IP address, and enter the IP address, subnet mask, and
default gateway address of your computer (which can be obtained from your system administrator).
Click OK twice. When prompted to restart your computer, click Yes.
Note
The driver installation is complete.

Windows 95 Version B

If your computer's operating system is Windows 95 Version B, follow these steps.
If you are installing the driver from Cisco.com, follow the steps below. If you are installing the driver
Step 1
from the CD that shipped with your client adapter, go to
a.
b.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
3-6
If the Windows 95 operating system files are installed on your computer, they are usually located in
the C:\Windows\Options\Cabs folder. Type C:\Windows\Options\Cabs in the Copy files from
dialog box. Click OK to copy the required files.
If Windows 95 prompts for the Windows 95 operating system CD, insert this CD into your
computer's CD-ROM drive. If your CD-ROM drive is drive D, the path in the dialog box should be
D:\Win95. Click OK to copy the required files.
On Windows 95, TCP/IP is not installed by default.
Use the computer's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Click the link for Cisco Aironet Wireless LAN Client Adapters.
Chapter 3 Installing the Client Adapter
Step 2.
OL-1394-04