After A Reboot Or Logon - Cisco Aironet Installation And Configuration Manual

Using LEAP with an Automatically Prompted Login
Step 2 If your client adapter authenticates, the message disappears, and the Server Based Authentication field
on the ACU Status screen shows "LEAP Authenticated."
If the authentication attempt fails, an error message appears after the LEAP timeout period has expired.
Refer to the

After a Reboot or Logon

After your computer reboots or you log on, follow the steps below to LEAP authenticate.
When the LEAP login screen appears (see
Step 1
click OK. The domain name is optional.
Figure 6-4
Note
The "LEAP Authentication in progress" message appears.
Step 2 If your client adapter authenticates, the message disappears, and the Server Based Authentication field
on the ACU Status screen shows "LEAP Authenticated."
If the authentication attempt fails, an error message appears after the LEAP timeout period has expired.
Refer to the
Step 3 When the network login screen appears (see
and password and click OK.
Note
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
6-6
"Error Messages" section in
LEAP Login Screen
The LEAP login screen shown above appears on computers running Windows NT, 2000, or
XP. The LEAP login screen looks slightly different on computers running other Windows
operating systems.
"Error Messages" section in
Figure 6-5 shows an example network login screen that may appear on computers running
Windows 95, 98, and Me. Your screen may look different.
login screen that appears on Windows 2000 systems. The login screen looks slightly different
on computers running Windows NT and XP.
Chapter 9 for the necessary action to take.
Figure 6-4), enter your LEAP username and password and
Chapter 9 for the necessary action to take.
Figure 6-5 and Figure
Figure 6-6
Chapter 6 Using EAP Authentication
6-6), enter your network username
shows the network
OL-1394-04