Chapter 5
Routine Procedures
Upgrading the Client Adapter Software
Before you upgrade the software, ensure that the client adapter is inserted properly.
Note
Follow these steps to upgrade your Cisco Aironet CB21AG or PI21AG client adapter software to a more
recent release and maintain the settings that were selected during the previous installation.
Obtain the desired software release. For instructions on obtaining software from Cisco.com, see the
Step 1
"Obtaining Client Adapter Software"
Double-click the software WinClient-802.11a-b-g-Vista-Ins-Wizard-vxx.exe file that you have saved
Step 2
on the device on which the client adapter is inserted. A window appears that asks you if you want to run
the software file.
Click Run. The Cisco Aironet Installation Program - InstallShield window appears (see
Step 3
Figure 5-1
Allow the preparation sequence to finish . After the preparation sequence finishes, the Cisco Aironet
Step 4
Installation Program—Previous installation detected window appears (see
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide for Windows Vista
OL-16534-01
section of Chapter 1 "Product Overview and Installation."
Cisco Aironet Installation Program—Installation Wizard Preparing Setup Window
Upgrading the Client Adapter Software
Figure
Figure
5-2).
5-1).
5-3