Inserting A Pci Card - Cisco Aironet Installation And Configuration Manual

Chapter 8 Routine Procedures
Figure 8-1
Go to the
Step 4
system.

Inserting a PCI Card

Turn off the PC and all its components.
Step 1
Remove the computer cover.
Step 2
Note
Remove the screw from the top of the CPU back panel above an empty PCI expansion slot. This screw
Step 3
holds the metal bracket on the back panel.
Static electricity can damage your PCI card. Before removing the adapter from the anti-static packaging,
Caution
discharge static by touching a metal part of a grounded PC.
Step 4 Examine the PCI card. The antenna connector and the LEDs face out of your computer and are visible
when you put the cover back on. The bottom edge of the card is the connector you will insert into an
empty expansion slot in your computer. See
Figure 8-2
OL-1394-04
Inserting a PC Card or PC-Cardbus Card into a Computing Device
"Installing the Driver" section on page 3-3
On most Pentium PCs, PCI expansion slots are white. Refer to your PC documentation for slot
identification.
Inserting a PCI Card into a PC
Antenna
connector
LEDs
Standard 2 dBi
dipole antenna
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
to install the driver for your computer's operating
Figure 8-2.
Card edge
connector
Inserting and Removing a Client Adapter
8-3