Cisco Aironet Installation And Configuration Manual page 150

Running an RF Link Test
Note
Step 5 Click the Start button to run the link test. While the test is running, statistics are displayed and updated
periodically.
Figure 7-7
Figure 7-8
Figure 7-7
Figure 7-8
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
7-20
The Windows TCP/IP stack fragments (splits up) packets that are greater than 512 bytes.
Therefore, the number of transmitted packets does not match the number of received packets
(even if none are lost) if the packet size is greater than 512 bytes.
shows the Linktest screen with the signal strength values displayed as percentages, and
shows the bottom of the same screen with the signal strength values displayed in dBm.
Linktest Screen (with Test Running and Signal Strength as a Percentage)
Bottom of Linktest Screen (with Test Running and Signal Strength in dBm)
Chapter 7 Performing Diagnostics
OL-1394-04