Cisco Aironet Installation And Configuration Manual page 145

Chapter 7 Performing Diagnostics
Table 7-4
Statistic
Packets No MIC Seed
Packets Wrong MIC Sequence
Up Time (hh:mm:ss)
Total Up Time (hh:mm:ss)
Transmit Statistics
Multicast Packets Transmitted
Broadcast Packets Transmitted
Unicast Packets Transmitted
Bytes Transmitted
Beacons Transmitted
Ack Packets Transmitted
RTS Packets Transmitted
CTS Packets Transmitted
Single Collisions
Multiple Collisions
Packets No Deferral
Packets Deferred Protocol
OL-1394-04
Client Adapter Statistics (continued)
Description
The number of packets that were discarded due to no MIC seed
being received.
Note
The number of packets that were discarded due to the MIC
sequence number being wrong.
Note
The amount of time (in hours:minutes:seconds) since the Reset
button was selected. If the client adapter has been running for
more than 24 hours, the time is displayed in days,
hours:minutes:seconds.
The amount of time (in hours:minutes:seconds) that the client
adapter has been receiving power. The total up time continues to
increment even if the Reset button is selected. If the adapter has
been running for more than 24 hours, the time is displayed in
days, hours:minutes:seconds.
The number of multicast packets that were transmitted
successfully.
The number of broadcast packets that were transmitted
successfully.
The number of unicast packets that were transmitted successfully.
The number of bytes of data that were transmitted successfully.
The number of beacon packets that were transmitted successfully
(in ad hoc mode only).
The number of acknowledgment (Ack) packets that were
transmitted in response to successfully received unicast packets.
The number of request-to-send (RTS) packets that were
transmitted successfully.
The number of clear-to-send (CTS) packets that were transmitted
in response to a successfully received RTS packet.
The number of packets that had to be retransmitted once due to a
collision.
The number of packets that had to be retransmitted more than
once due to additional collisions.
The number of packets that were able to be transmitted
immediately without being delayed due to energy detect or
protocol deferral.
The number of packets that were delayed due to 802.11 protocol
reasons (such as not enough time left to send the packet).
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Viewing Statistics for Your Client Adapter
This field is not displayed if the client adapter's driver
does not support MIC functionality or MIC is not enabled
on the access point.
This field is not displayed if the client adapter's driver
does not support MIC functionality or MIC is not enabled
on the access point.
7-15