Upgrading The Driver For Windows 2000 - Cisco Aironet Installation And Configuration Manual

Chapter 8 Routine Procedures
Step 12 In the Windows NT Setup window, enter the path to the extracted driver files and click Continue.
Step 13 Follow the instructions on the screen to complete the upgrade process.

Upgrading the Driver for Windows 2000

Step 1 Use your computer's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Step 2 Click the link for Cisco Aironet Wireless LAN Client Adapters.
Step 3 Perform one of the following:
•
•
Note
Step 4 Read and accept the terms and conditions of the Software License Agreement.
Step 5 Select the file again to download it.
Step 6 Save the file to a floppy disk or to your computer's hard drive.
Step 7 Find the file using Windows Explorer, double-click it, and extract its files to a folder.
Make sure your client adapter is installed in your computer.
Step 8
Double-click My Computer, Control Panel, and System.
Step 9
Click the Hardware tab and Device Manager.
Step 10
Step 11 Double-click Network Adapters and the Cisco Systems Wireless LAN Adapter.
Click the Driver tab.
Step 12
Step 13 Click the Update Driver button.
Step 14 The Update Device Driver Wizard window appears. Click Next.
Step 15 Select Display a list of the known drivers for this device so that I can choose a specific driver and
click Next.
Step 16 Click Have Disk.
Enter or browse to the path where the extracted driver files are and click OK.
Step 17
A message appears indicating that the system is ready to install the new driver. Click Next and Finish.
Step 18
The driver upgrade is complete, and the old driver is overwritten by the new one.
OL-1394-04
If you want to ensure compatibility among all three pieces of client adapter software and download
the software files from a single location, click the bundle that corresponds to your client adapter's
model number (such as CB20A or 350 series). Select the latest bundled file for Windows 2000 and
your specific client adapter type (such as CB or MPI).
If you want to select the client adapter's software files individually, find the section for Windows
drivers and click the link for Windows 2000. Select the driver file with the greatest version number
for your specific client adapter type (such as CB or MPI).
The drivers for PC, LM, and PCI cards are labeled PCMCIA-LMC-PCI, the drivers for mini PCI
cards are labeled MPI, and the drivers for PC-Cardbus cards are labeled CB.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Driver Procedures
8-11