Cisco Aironet Installation And Configuration Manual page 178

ACU Procedures
Option
EAP-SIM
Create ACU Icon on your
Desktop
Allow Non-Administrator
Users to save profiles to the
registry
Step 6 In the Choose Destination Location screen, perform one of the following:
If you want the ACU program files to be installed in the default location (C:\Program Files, if
•
C:\Program Files is the default Windows program file folder), click Next.
If you want to specify a different destination location for the ACU program files, click Browse,
•
select a location, and click Next.
Step 7 In the Select Program Folder screen, specify a program folder name for ACU by selecting from the list
of existing folders (the default name is Cisco Aironet) or typing in a new folder name; then click Next.
A status screen displays the progress of the installation. Then one of two Setup Complete screens
appears, depending on whether Windows needs to be restarted to complete the installation.
Perform one of the following:
Step 8
If your computer does not need to be rebooted, select either of the following options and click
•
Finish:
Option
View the README.TXT file Opens a read-me file containing information about ACU.
Launch the Aironet Client
Utility
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
8-26
Description
Installs the EAP-SIM supplicant, which enables the client to support
EAP-SIM authentication. If this option is not selected now and you
later want to use EAP-SIM, you must run this installation program
again, select Modify, and select this option.
Default: Deselected
Refer to Chapter 5
Note
Note PC-Cardbus cards do not support EAP-SIM authentication.
This option appears for all operating systems except Windows
Note
95; however, your client adapter can authenticate using
EAP-SIM only if your computer's operating system is Windows
2000 (with Service Pack 3 or greater and the Windows 2000
Wireless 802.1X hot fix) or Windows XP.
Causes the installation program to add an ACU icon to your computer's
desktop to provide quick access to the utility.
Enables users without administrative rights to modify profiles in ACU
and save them to the registry on computers running Windows NT, 2000,
or XP.
Note This option is not available for Windows 95, 98, and Me
because these versions of Windows do not support different
classes of users.
Description
Opens ACU so you can configure your client adapter.
Chapter 8
for information on using EAP-SIM.
Routine Procedures
OL-1394-04