Setting Advanced Ad Hoc Parameters - Cisco Aironet Installation And Configuration Manual
Wireless lan client adapters for windows
Hide thumbs
Also See for Aironet:
- Installation and configuration manual (92 pages) ,
- Quick start manual (12 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Chapter 5
Configuring the Client Adapter
Setting Advanced Ad Hoc Parameters
Setting Advanced Ad Hoc Parameters
You can set advanced ad hoc parameters only if your client adapter has been set to operate in an ad hoc
Note
network. See the Network Type parameter in
Table
5-2.
The Advanced (Ad Hoc) screen (see
Figure
5-4) enables you to set parameters that control how the client
adapter operates within an ad hoc network. To access this screen, select the Advanced (Ad Hoc) tab
from the Properties screens.
Figure 5-4
Advanced (Ad Hoc) Screen
Table 5-5
lists and describes the client adapter's advanced ad hoc parameters. Follow the instructions in
the table to change any parameters.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
5-17
OL-1394-04
Advertisement
Table of Contents
Troubleshooting
