Downloading Firmware; Basic Installation And Configuration; Upgrading The Firmware For The Ata Device; Downloading Firmware" Section - Cisco Small Business SPA2102 Administration Manual

Basic Administration and Configuration

Downloading Firmware

Downloading Firmware

Basic Installation and Configuration

Upgrading the Firmware for the ATA Device

STEP 1
Cisco Small Business ATA Administration Guide
• Computer with Microsoft Windows XP or Windows Vista (for system
configuration)
• Analog phones
• UPS (uninterruptible Power Source) recommended for devices such as the
Integrated Access Device, network switch, router, and PoE switch to ensure
that your phone system continues to work during a power failure, just like your
home phone.
Always download and install the latest firmware for your ATA device before doing
any configurations. You can find the latest firmware by going to:
http://www.cisco.com/en/US/products/ps10024/
tsd_products_support_series_home.html
and clicking the Download Software link.
See your the Quick Installation Guide and the User Guide for the ATA model that
you are installing. If you are configuring the complete SPA9000 Voice System, also
refer to the documentation for the SPA9000 Voice System.
In this procedure, you install the firmware files that you downloaded previously.
Determine the address of the ATA device:
a. Connect an analog telephone to the Phone 1 or Phone 2 port on the ATA
device. (You may not hear a dial tone. Continue to step b.)
b. Press **** on the keypad to access the IVR menu.
c. Press 110# to determine the Internet (WAN) IP address.
2
37