Uninstalling Acu; Uninstalling Acu Versions Prior To 4.13; Uninstalling Acu Version 4.13 Or Greater - Cisco Aironet Installation And Configuration Manual

Chapter 8 Routine Procedures
•
The ACU upgrade is complete.

Uninstalling ACU

The procedure for uninstalling ACU varies based on the software's version number. Follow the
instructions in one of the sections below to uninstall ACU.

Uninstalling ACU Versions Prior to 4.13

If a version of ACU earlier than 4.13 is installed on your computer, Cisco recommends that you uninstall
it before installing ACU version 5.0 or greater. Follow the steps below to uninstall a version of ACU
prior to 4.13.
Step 1 Double-click My Computer, Control Panel, and Add/Remove Programs.
Step 2 Select the Aironet Client Utility (ACU).
Step 3 Click Add/Remove or Change/Remove.
Step 4 When prompted to confirm your decision, click Yes. ACU is uninstalled.

Uninstalling ACU Version 4.13 or Greater

Follow the steps below if you ever need to uninstall ACU version 4.13 or greater and its setup program.
Note Cisco does not recommend uninstalling ACU version 4.13 or greater before installing the latest
version of ACU.
Step 1 Close any Windows programs that are running.
Step 2 Select Start > Run, enter the path to the installed ACU files (the default location is C:\Program
Files\Cisco Aironet\setup.exe), and click OK. The Welcome screen for the Aironet Client Utility setup
maintenance program appears.
Step 3 Select Remove and click Next.
Step 4 When asked if you want to completely remove the selected application and all of its components, click
OK. The Setup Complete screen appears.
OL-1394-04
If your computer needs to be rebooted, select Yes, I want to restart my computer now or No, I will
restart my computer later and click Finish.
Note If you are prompted to reboot your computer, Cisco recommends that you select the Yes,
I want to restart my computer now option.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
ACU Procedures
8-27