Installing The Driver For Windows Millennium Edition (Me) - Cisco Aironet Installation And Configuration Manual

Chapter 3 Installing the Client Adapter

Installing the Driver for Windows Millennium Edition (Me)

The first release of Windows Me comes with driver version 6.15, which is installed automatically the
first time you insert a client adapter. To upgrade to the driver on the CD that shipped with your client
adapter or on Cisco.com, follow these steps.
Step 1 If you are installing the driver from Cisco.com, follow the steps below. If you are installing the driver
from the CD that shipped with your client adapter, go to
a.
b.
c.
d.
e.
f.
g.
h.
Follow the instructions in
Step 2
by operating system and are different for PC cards, PC-Cardbus cards, and PCI cards.
Insert the CD that shipped with your client adapter or a floppy disk containing the latest driver into your
Step 3
computer, unless you are installing the driver from your computer's hard drive.
Double-click My Computer, Control Panel, and System.
Step 4
Click the Device Manager tab.
Step 5
Double-click Network Adapters.
Step 6
Step 7 Select the Cisco Aironet Wireless LAN Adapter. Click Properties.
Step 8 In the client adapter Properties window, click the Driver tab.
Step 9 Click Update Driver. The Update Device Driver Wizard window appears.
OL-1394-04
Use the computer's web browser to access the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
Click the link for Cisco Aironet Wireless LAN Client Adapters.
Perform one of the following:
If you want to ensure compatibility among all three pieces of client adapter software and
–
download the software files from a single location, click the bundle that corresponds to your
client adapter's model number (such as CB20A or 350 series). Select the latest bundled file for
Windows Me and your specific client adapter type (such as CB or MPI).
– If you want to select the client adapter's software files individually, find the section for
Windows drivers and click the link for Windows Me. Select the driver file with the greatest
version number for your specific client adapter type (such as CB or MPI).
Note The drivers for PC, LM, and PCI cards are labeled PCMCIA-LMC-PCI, the drivers for
mini PCI cards are labeled MPI, and the drivers for PC-Cardbus cards are labeled CB.
Read and accept the terms and conditions of the Software License Agreement.
Select the file again to download it.
Save the file to a floppy disk or to your computer's hard drive.
Find the file using Windows Explorer, double-click it, and extract its files to a folder.
Go to Step 2.
Chapter 8
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Step
to insert the client adapter into your computer. The instructions vary
Installing the Driver
2.
3-15