Acu Procedures; Opening Acu - Cisco Aironet Installation And Configuration Manual

Chapter 8 Routine Procedures
Uninstalling the Driver for Windows XP
This procedure does not uninstall the driver that was bundled with Windows XP. It uninstalls only
Note
drivers to which you have upgraded. When you follow the steps below to uninstall an upgraded driver
and then eject and reinsert the card, Windows finds the original driver and reinstalls it automatically.
These instructions assume you are using Windows XP's classic view rather than its category view.
Note
Step 1 Double-click My Computer, Control Panel, and System.
Step 2 Click the Hardware tab and Device Manager.
Step 3 Double-click Network Adapters and the Cisco Systems Wireless LAN Adapter.
Step 4 Click the Driver tab and the Uninstall button.
Step 5 A warning appears indicating that you are about to uninstall the client adapter from your system. Click
OK.

ACU Procedures

This section provides instructions for the following procedures:
•
•
•
•
•
•
•

Opening ACU

To open ACU, perform one of the following:
•
•
•
OL-1394-04
Opening ACU, see below
Exiting ACU, see page 8-20
Modifying ACU installation settings, see
Determining the version of ACU, see
Upgrading ACU, see page 8-24
Uninstalling ACU, see page 8-27
Deleting the ACU icon from the desktop, see
Double-click the Aironet Client Utility (ACU) icon on your desktop.
Select Aironet Client Utility (ACU) from the folder in the Windows Start Menu that you chose
during installation [the default location is Start > Program Files > Cisco Aironet > Aironet Client
Utility (ACU)].
Double-click My Computer > Control Panel > Aironet Client Utility.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
page 8-20
page 8-23
page 8-28

ACU Procedures

8-19