Buttons On The Acu Screens; Network Configurations Using The Client Adapter - Cisco Aironet Installation And Configuration Manual

Chapter 1 Product Overview

Buttons on the ACU Screens

The buttons on the ACU screens are used to perform specific functions.
common buttons.
Table 1-2
Button
Apply
Cancel
Defaults
Help
OK
Start
Stop

Network Configurations Using the Client Adapter

The client adapter can be used in a variety of network configurations. In some configurations, access
points provide connections to your network or act as repeaters to increase wireless communication
range. The maximum communication range is based on how you configure your wireless network.
This section describes and illustrates the two most common network configurations:
•
•
For examples of more complex network configurations involving client adapters and access points, refer
to the Hardware Installation Guide for your access point.
Note Refer to
OL-1394-04
Buttons on the ACU Screens
Ad hoc wireless local area network (LAN)
Wireless infrastructure with workstations accessing a wired LAN
Chapter 5 for information on setting the client adapter's network mode.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Description
Saves any changes without exiting the screen
Exits the screen without saving any changes
Displays the default value of each parameter
Provides information on the screen and its parameters
Saves any changes and exits the screen
Initiates a test
Stops a test that is running
Network Configurations Using the Client Adapter
Table 1-2 describes the most
1-7