Cisco Aironet Installation And Configuration Manual page 173

Chapter 8 Routine Procedures
Step 4 In the Select Options screen, select as many of the following options as desired and click Next:
Option
LEAP
Allow Saved LEAP User
Name and Password
PEAP
OL-1394-04
Description
Enables you to create a profile in ACU that uses LEAP authentication.
If this option is not selected now and you later want to use LEAP, you
must run this installation program again, select Modify, and select this
option.
Refer to
Note
If you select LEAP on a Windows 95, 98, or 98 SE device,
Note
Microsoft hot fixes are installed during ACU installation to fix
two problems related to the use of LEAP. Refer to
more information on the hot fixes.
If you select LEAP on a Windows XP device, you cannot use
Note
Windows XP's fast user switching feature.
Enables you to create a profile in ACU that uses a saved (rather than
temporary) username and password for LEAP authentication. When
such a profile is used, the saved username and password are used to
start the LEAP authentication process, and you are not prompted to
enter them.
This option is available only if the LEAP option is selected.
Note
Installs the PEAP supplicant, which enables the client to support PEAP
authentication. If this option is not selected now and you later want to
use PEAP, you must run this installation program again, select Modify,
and select this option.
Default: Selected
Refer to
Note
PC-Cardbus cards do not support PEAP authentication.
Note
Note This option appears for all operating systems except Windows
95; however, your client adapter can authenticate using PEAP
only if your computer's operating system is Windows 2000
(with Service Pack 3 or greater and the Windows 2000 Wireless
802.1X hot fix) or Windows XP.
Note Service Pack 1 for Windows XP includes Microsoft's PEAP
supplicant, which supports a Windows username and password
only and does not interoperate with Cisco's PEAP supplicant.
To use Cisco's PEAP supplicant, install ACU version 5.05 or
greater after Service Pack 1 for Windows XP. Otherwise, it will
be overwritten by Microsoft's PEAP supplicant.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Chapter 5 for information on using LEAP.
Chapter 5 for information on using PEAP.
ACU Procedures
Chapter 9 for
8-21