Using Active Mode - Cisco Aironet Installation And Configuration Manual

Appendix F Performing a Site Survey

Using Active Mode

Using Active Mode

Follow the steps below to activate the site survey active mode and obtain current information about your
client adapter's ability to transmit and receive RF packets.
From the Site Survey - Passive Mode screen (see Figure F-1), click the Setup button. The Site Survey
Step 1
Active Mode Setup screen appears (see Figure F-3).
Figure F-3 Site Survey Active Mode Setup Screen
Table F-2 lists and describes the parameters that affect how the site survey is performed. Follow the
instructions in the table to set any parameters.
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
F-7
OL-1394-04