For Otp Databases Using Secure Computing Softoken Ii Version 2.0 - Cisco Aironet Installation And Configuration Manual

Error Messages
Error Message Program path must be specified for SofToken Version 1.3.
Explanation
drop-down box on the Generic Token Card Properties screen, but the SofToken program path was not
entered.
Recommended Action
Error Message SofToken is not set up to allow processing from SofToken calls. Calls
have been disabled from the SofToken Manager, the SofToken program does not have
any valid users yet, or the last person to use SofToken was not initialized
correctly.
Explanation
Recommended Action
you are set up as a valid user.
Error Message Unable to launch SofToken.exe. Please make sure SofToken is installed
correctly and the correct program path is entered.
Explanation
Recommended Action
entered.
Error Message Unable to load SofToken library. Please make sure that SofToken is
installed correctly.
Explanation
Recommended Action
entered.

For OTP Databases Using Secure Computing SofToken II Version 2.0

Error Message Error getting the OTP password for the user. Run SofToken II to ensure
the user is set up correctly.
Explanation
Recommended Action
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
9-18
Secure Computing SofToken Version 1.3 was selected from the Supported Type
Enter the path to the SofToken program in the SofToken Program Path field.
The SofToken program is not set up to process SofToken API calls.
Make sure that SofToken is configured to enable SofToken calls and verify that
An error occurred with the SofToken program.
Make sure that SofToken is installed correctly and the correct program path is
An error occurred with the SofToken program.
Make sure that SofToken is installed correctly and the correct program path is
An error occurred while attempting to obtain the OTP password for the user.
Run the SofToken II program to make sure that the user is set up properly.
Chapter 9 Troubleshooting
OL-1394-04