Enabling Eap-Md5 - Cisco Aironet Installation And Configuration Manual

Chapter 5 Configuring the Client Adapter
Figure 5-8
Step 3 Select the Use a certificate on this computer option.
Step 4 Select the Validate server certificate check box.
Step 5 Make sure that the name of the certificate authority from which the EAP-TLS certificate was
downloaded appears in the Trusted root certificate authority field.
Note
Step 6 Click OK to save your settings. The configuration is complete.
Chapter 6
Note
is selected for use.

Enabling EAP-MD5

Follow the steps below to enable EAP-MD5.
Step 1 For EAP type, select MD5-Challenge.
Step 2 Click OK to save your settings. The configuration is complete.
Chapter 6
Note
is selected for use.
OL-1394-04
Smart Card or other Certificate Properties Screen
If you leave this field blank, you are prompted to accept a connection to the root certification
authority during the authentication process.
describes the sequence of events that occurs when a profile that is set for EAP authentication
describes the sequence of events that occurs when a profile that is set for EAP authentication
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Setting Network Security Parameters
5-37