Installing The Driver For Windows 95 - Cisco Aironet Installation And Configuration Manual

Installing the Driver
Table 3-1
Operating System
Windows 95
Windows 98
Windows NT
Windows 2000
Windows Millennium Edition (Me)
Windows XP
Before you begin the driver installation process, make sure you have the installation disks
Note
for your computer's operating system nearby. Some operating system files may be needed
to complete the driver installation.

Installing the Driver for Windows 95

Note Windows 95 is supported only by 2.4-GHz client adapters. Therefore, a Windows 95 driver is not
available for the 5-GHz client adapter.
Note Windows 95 limits your computer's network connections to four. If you try to install a client adapter
when four network devices (such as a PCMCIA Ethernet card, dial-up adapter, VPN adapter, docking
station Ethernet card, etc.) are already connected to your computer, the new adapter cannot establish a
network connection.
The driver installation instructions vary for Windows 95 Version A and Version B. You can determine
which version your computer is running by double-clicking My Computer, Control Panel, System, and
General. The version of your computer's operating system is located under the System heading. If you
have Windows 95 Version B, the version number ends with the letter B.
•
•
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
3-4
Locating Driver Installation Instructions
For Windows 95 Version A driver installation instructions, go to the
section on page 3-5.
For Windows 95 Version B driver installation instructions, go to the
section on page 3-6.
Page Number
3-4
3-8
3-11
3-13
3-15
3-17
Chapter 3 Installing the Client Adapter
"Windows 95 Version A"
"Windows 95 Version B"
OL-1394-04