Table of Contents
Advertisement
Basic Administration and Configuration
Downloading Firmware
Downloading Firmware
Basic Installation and Configuration
Upgrading the Firmware for the ATA Device
STEP 1
STEP 2
ATA Administration Guide
•
Analog phones
•
UPS (uninterruptible Power Source) recommended for devices such as the
Integrated Access Device, network switch, router, and PoE switch to ensure
that your phone system continues to work during a power failure, just like your
home phone.
Always download and install the latest firmware for your ATA device before doing
any configurations. You can find the latest firmware at
smallbiz.
See your the Quick Installation Guide and the User Guide the ATA model that you
are installing. If you are configuring the complete SPA9000 Voice System, also
refer to the documentation for the SPA9000 Voice System.
In this procedure, you install the firmware files that you downloaded previously.
Determine the address of the ATA device:
a. Connect an analog telephone to the Phone 1 or Phone 2 port on the ATA
device.
b. Press **** on the keypad to access the IVR menu.
c. Press 110# to determine the Internet (WAN) IP address.
Make a note of the IP address that is announced.
If the administration computer is connected to the Ethernet port of the ATA
NOTE
device, the default IP address is 192. 1 68.0. 1 .
www.cisco.com/go/
2
36
Advertisement
Table of Contents
