Configuring The Client Adapter - Cisco Aironet Installation And Configuration Manual

Appendix E Configuring the Client Adapter through Windows XP

Configuring the Client Adapter

Follow the steps below to configure your client adapter using Windows XP.
If you installed ACU but intend to use Windows XP to configure the client adapter, open ACU and
Note
make sure the Use Another Application To Configure My Wireless Settings option is selected on
the Profile Manager screen.
These instructions assume you are using Windows XP's classic view rather than its category view.
Note
Make sure the client adapter's driver has been installed and the client adapter is inserted in the Windows
Step 1
XP device.
Double-click My Computer, Control Panel, and Network Connections.
Step 2
Right-click Wireless Network Connection.
Step 3
Click Properties. The Wireless Network Connection Properties screen appears.
Step 4
Step 5 Select the Wireless Networks tab. The following screen appears (see
Figure E-1
OL-1394-04
Wireless Network Connection Properties Screen (Wireless Networks Tab)
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for Windows
Configuring the Client Adapter
Figure E-1).
E-5