With A Saved Username And Password; After Your Eap-Fast Credentials Expire - Cisco AIR-PCM352 - Aironet 350 Series 11Mbps Wireless LAN PC Card Adapter Installation And Configuration Manual

Using LEAP or EAP-FAST

With a Saved Username and Password

After you select a profile that uses LEAP or EAP-FAST authentication (with a saved username and
password) or you eject and reinsert the client adapter or reset your Windows CE device while this profile
is selected, the client adapter should authenticate automatically. The ACU Profiles screen indicates if
your client adapter is authenticated to an access point.
Note
Note

After Your EAP-FAST Credentials Expire

If the EAP-FAST credentials (username and password) for your current profile expire or become invalid,
follow these steps to change your password.
Step 1 When the Password Expired screen appears (see
enter your old password in the Old Password field.
Figure 6-2
Enter your new password in both the New Password and Confirm New fields and tap OK.
Step 2
If prompted, log off and on again in order to update your local cached account with your new password.
Step 3
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
6-4
If you entered your username or password incorrectly in the ACU Properties screen or entered
ones that are not valid for the RADIUS server on the network, the Wireless Login Module screen
appears with a message indicating that your login was incorrect. Tap Cancel; then change your
username or password on the ACU Properties screen and tap OK.
If you want to log out of a LEAP or EAP-FAST session, select Start > Programs > Cisco >
Wireless Login Module and tap the Logout button on the Wireless Login Module screen.
Password Expired Screen
Chapter 6
Figure 6-2) to indicate that your password has expired,
Using EAP Authentication
OL-1375-04