Resync Url; Reboot Url - Cisco SPA2102 Administration Manual

Basic Administration and Configuration
Upgrading, Rebooting, and Resyncing Your ATA Device
NOTE
NOTE
Cisco Small Business ATA Administration Guide
If no is specified, TFTP is assumed. If no
host that requests the URL is used as
If no port specified, the default port of the protocol is used. (69 for TFTP or 80 for
HTTP)
The
directory on the TFTP or HTTP server. If no
is assumed, as in the following example:

Resync URL

The Resync URL lets you force the ATA device to do a resync to a profile specified
in the URL, which can identify either a TFTP, HTTP, or HTTPS server. The syntax of
the Resync URL is as follows:
The SPA resyncs only when it is idle.
If no parameter follows
page is used.
If no is specified, TFTP is assumed. If no
host that requests the URL is used as
If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443
for HTTPS).
The profile-path is the path to the new profile with which to resync, for example:

Reboot URL

The Reboot URL lets you reboot the ATA device. The Reboot URL is as follows:
The ATA device reboots only when it is idle.
is typically the file name of the binary located in a
the Profile Rule setting from the Provisioning
is specified, the
.
is specified,
is specified, the
.
2
39