Table of Contents
Advertisement
Basic Administration and Configuration
Provisioning Your ATA Device
NOTE
Provisioning Your ATA Device
ATA Administration Guide
The profile-path is the path to the new profile with which to resync, for example:
http://192.168.2.217admin/resync?tftp://192.168.2.251/spaconf.cfg
Reboot URL
The Reboot URL lets you reboot the ATA device. The Reboot URL is as follows:
http://spa-ip-addr/admin/reboot
The ATA device reboots only when it is idle.
This section describes the provisioning functionality of the ATA device. This
section includes the following topics:
•
"Provisioning Capabilities" section on page 44
•
"Configuration Profile" section on page 45
For detailed information about provisioning your ATA device, refer to the SPA
Provisioning Guide.
Provisioning Capabilities
The ATA device provides for secure provisioning and remote upgrade.
Provisioning is achieved through configuration profiles transferred to the device
via TFTP, HTTP, or HTTPS. To configure Provisioning, go to Provisioning tab in the
administration web server.
The ATA device can be configured to automatically resync its internal
configuration state to a remote profile periodically and on power up. The
automatic resyncs are controlled by configuring the desired profile URL into the
device.
The ATA device accepts profiles in XML format, or alternatively in a proprietary
binary format, which is generated by a profile compiler tool available from Cisco.
Find the Profiler Compiler for your ATA at
sell/smb/products/voice_and_conferencing.html#~vc_technical_resources.
http://www.cisco.com/web/partners/
2
44
Advertisement
Table of Contents
