Ext Status; Line/Call Status - Cisco WIP310 - iPhone Wireless VoIP Phone Administration Manual

Cisco SPA 500 Series and Wireless IP Phone Field Reference
Info Tab
Cisco SPA 500 Series and WIP310 IP Phone Administration Guide

Ext Status

The following parameters show for each extension on the phone.
Parameter
Registration State
Last Registration At
Next Registration In
Message Waiting
Mapped SIP Port

Line/Call Status

The following parameters show for each line and call on the phone.
Parameter
Call State
Tone
Encoder
Decoder
Type
Remote Hold
Callback
Peer Name
Description
Shows "Registered" if the phone is registered, "Not
Registered" if the phone is not registered to the ITSP.
Last date and time the line was registered.
Number of seconds before the next registration
renewal.
Indicates whether the phone user has a new voice mail
waiting: Yes or No. This is updated when voice mail
notification is received.
Port number of the SIP port mapped by NAT.
Description
Status of the call.
Type of tone used by the call.
Codec used for encoding.
Codec used for decoding.
Direction of the call.
Indicates whether the far end has placed the call on
hold.
Indicates whether the call was triggered by a call back
request.
Name of the internal phone.
B
202