Configuring The Vpn On The Security Appliance; Configuring The Vpn On The Cisco Spa 525G/525G2 - Cisco SPA 525G2 Administration Manual

Configuring Security, Quality, and Network Features
Configuring SSL VPN on the Cisco SPA 525G/525G2
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
To configure and use the Cisco SPA 525G/525G2 on a VPN, you must do the
following:
1. Configure the VPN on the VPN server using Cisco AnyConnect VPN client
software.
2. Configure the VPN administrative settings on the Cisco SPA 500 Series IP
phone using the configuration utility.
3. Configure the VPN user settings using the configuration utility or on the IP phone
using the phone menu.

Configuring the VPN on the Security Appliance

Specific configuration instructions are not presented in this document. For detailed
instructions for your particular device, see the application notes in the
Business Support Community.
Download the Cisco AnyConnect VPN client software from Cisco.com and install it
on the VPN server.
Download the Cisco IOS version that supports this feature and install it on the VPN
server.
Configure SSL VPN on the VPN server.
Ensure the VPN is functional and you can connect to the VPN using the Cisco
AnyConnect VPN client.

Configuring the VPN on the Cisco SPA 525G/525G2

SPCP Settings (Optional)
If the phone will be connecting to the VPN using SPCP, configure these
administrative settings using the configuration utility:
Log in to the configuration utility.
Click the System tab.
Under Optional Network Configuration, in the Alternate TFTP field, choose yes.
In the TFTP Server field, enter the IP address of the Cisco Unified Communications
500 Series server. The phone obtains its software load from this server when the
5
Cisco Small
136