Turn On Do Not Disturb For A Specific Line; Turn On Dnd From The Phone Web Page; Block An Anonymous Call - Cisco 7800 Series User Manual

Settings

Turn on Do Not Disturb for a Specific Line

Set do not disturb (DND) to silence your phone and suppress incoming call notifications when you need to
avoid distractions. You can suppress all incoming call notifications or you can suppress a specific caller
notification.
Procedure
Step 1
Select a phone line using the Navigation cluster.
Step 2 Press Applications
Step 3
Select User preferences > Call preferences > Do not disturb.
Note
Step 4
Select On to turn on DND or select Off to turn off DND.
Step 5 Press Set to save the setting.

Turn on DND from the Phone Web Page

Procedure
Step 1
On the phone web page, select User Login > Voice > User.
Step 2 Under Supplementary Services, set DND Settings to Yes.
Step 3
Click Submit All Changes.

Block an Anonymous Call

You can block an incoming call that does not have caller information for a specific line or all lines.
If your administrator has enabled synchronization of Anonymous Call Rejection between a line and a BroadSoft
XSI service, then your setting only applies to the specific line instead of all lines. Typically, the setting applies
to all the lines, except for the ones where the synchronization is enabled.
Procedure
Step 1 Press the Navigation cluster up or down to select a phone line.
Step 2 Press Applications
Step 3 Select User preferences > Call preferences > Block anonymous call.
.
If the Do not disturb menu doesn't display on the screen, contact your administrator.
.

Turn on Do Not Disturb for a Specific Line

Cisco IP Phone 7800 Series Multiplatform Phones User Guide
97