Block An Anonymous Call; Turn On Do Not Disturb For A Specific Line - Cisco 6800 Series User Manual

Settings
Before you begin
Your administrator enables Block CID feature on your phone.
Your administrator enables Block CID feature on the XSI BroadWorks server.
Procedure
Step 1
Press Applications
Step 2
Select User preferences > Call preferences.
Step 3
Select Block caller ID.
Step 4
Press Select to toggle caller ID blocking on or off.
If your administrator enables the block caller ID feature on the XSI Broadwords server, your phone retrieves
the value from the server and you see the value that your administrator sets on the server. You can then modify
the value from the Block caller ID menu on the phone.
Step 5
Press Set to save the change.

Block an Anonymous Call

You can block an incoming call that does not have caller information.
Procedure
Step 1
Press Applications
Step 2
Select User preferences > Call preferences > Block anonymous call.
Step 3
Select On if you want to block the call that does not have caller information, or select Off to allow the call.
Step 4
Press Set to save the setting.

Turn on Do Not Disturb for a Specific Line

Set do not disturb (DND) to silence your phone and suppress incoming call notifications when you need to
avoid distractions. You can suppress all incoming call notifications or you can suppress a specific caller
notification.
Procedure
Step 1
Select a phone line using the Navigation cluster.
Step 2
Press Applications
Step 3
Select User preferences > Call preferences > Do not disturb.
Note
.
.
.
If the Do not disturb menu doesn't display on the screen, contact your administrator.
Cisco IP Phone 6800 Series Multiplatform Phones User Guide
Block an Anonymous Call
71