Aggregate Vlans; Aggregate Vlan Parameters - D-Link DES-6300 User Manual
D-link modular l3 ethernet switch
Hide thumbs
Also See for DES-6300:
- User manual (108 pages) ,
- User manual (251 pages) ,
- User manual (23 pages)
Table of Contents
Advertisement
Modular L3 Ethernet Switch User's Guide
To edit the Default VLAN window:
1.
Display the Default VLAN window.
2.
Define the Default VLAN Enable as true (return to the initial VLAN setting) or false
(user set VLANs).
3.
Enter the Default VLAN Tag to identify the VLAN previously set by the user. (a value
between 1 and 4096).
Note: This option is only available if the user has set VLANs on the switch
4.
Click
to update the device.
Aggregate VLANs
This section will help the user understand and configure Aggregated VLANs, including:
Aggregate VLAN Parameters
Aggregate VLAN Table
Aggregate Sub VLAN Table
Aggregate VLAN Parameters
The Aggregated VLAN Parameters window enables routers to respond to ARP requests for
nodes located on different sub-VLANs belonging to the same Super VLAN. Routers respond
with their MAC address.
When ARP Proxy is disabled, routers respond to only ARP requests for their IP addresses.
To displays the Aggregated VLAN Parameters window:
Figure 6- 33. Default VLAN window
69
Advertisement
Table of Contents
