Static Route - D-Link DSL-226 User Manual

Section 4 - Configuration
The Static Routes page allows you to define custom routes to control how data
traffic is moved around your network. To access this page, go to Features >

Static Route.

If you wish to remove a rule, click
in the Edit column. If you wish to create a new rule, click the Add
rule, click
Rule button. Click Save when you are done.
Complete the following to create or edit a rule:
Create New Rule
Destination Enter the destination subnetwork IP address.
Address:
Destination
Enter the subnet mask of the destination address. The subnet mask
Subnet Mask determines an IPv4 subnetwork.
(IPv4):
Gateway IP
Enter your next hop gateway to be taken if this route is used. Or select
Address: the interface to transit the packets of this static route. (Go to Settings
> Internet to obtain the configured WAN interfaces.) PVC denotes the
WAN port configured with ADSL service and PTM denotes the WAN
port configured with VDSL service.
Metric: The route metric is a value from 0 to 15 that indicates the cost of
using this route.
Click Apply when you are done. A maximum of 16 rules can be defined.
D-Link DSL-226 User Manual
Static Route
in the Delete column. If you wish to edit a
69