4 Configuration
Figure 4.116 – L2 Features > LLDP > LLDP Local Port Information (Show Detail)
L2 Features > LLDP > LLDP Neighbor Port Information
This window is used to display the information learned from the neighbors. The switch receives packets from
a remote station but is able to store the information as local.
Port: Select the port number that will be displayed.
Click Find to locate a specific entry based on the information entered.
Click Clear to clear the specific port information.
Click Clear All to clear all the port information displayed.
L3 Features > IPv4 Interface
This window is used to configure the IPv4 interface settings.
The fields that can be configured are described below:
Figure 4.117 – L2 Features > LLDP > LLDP Neighbor Port Information
Figure 4.118 – L3 Features > IPV4 Interface (IPv4 Interface Settings)
D-Link 10 Gigabit Ethernet Switch User Manual
8
4
8
4