Adjusting The Placement Of The Punch Hole - Minolta Di251 Service Manual

1.10.9

Adjusting the placement of the punch hole

Select a finishing mode.
SELECT POSITION to Select
hole punching positon
OFF
Di251/Di351
Perform this procedure after the basic position
adjustments of the main unit's Tray1 are finished.
1. Select the A4 horizontal tray.
2. Touch the "Non-Sort" key.
Mixed Orig Detection
Memory Free
3. Touch the "Hole Punch" key.
Memory Free
4. Touch "Select Position".
Use
the
Memory Free
5. Select the position of the punch hole.
Memory Free
6. Press the Start key.
I-66 Rev. 1.1.0.0/03.01